Safety precautions during forging

There will be some dangers in the forging process, in the entire working environment, the staff must pay attention to their own safety. So what are the safety precautions for the forging process?
1, the heating furnace and forging equipment should be set in the correct position, avoid dense in one place, the workpiece process should be reasonable, the finished forging should be moved from the workshop, if possible, the processing process should be mechanized, and good management.
3, there should be effective ventilation of the whole workshop, the heating furnace should have a local exhaust system, the high temperature workplace should be equipped with cold air shower device, and install air curtains around the door.
3, the heating furnace should have a good air flow; Furnace smoke, smoke and hot air should be discharged to the outside of the workshop.
4, the radiation heat source and air should be insulated by water curtain, reflection or heat insulation barrier.
5, should provide a insulated lounge, and equipped with air shower and water spray equipment.
6, dangerous noise sources should be closed or installed sound absorption board, workshop should be away from residential areas.
7, in order to suppress vibration, the equipment should be installed on a deep and thick foundation below the foundation of the building, and separated from all structural components.
8, employees should receive physical examination before taking up the post, and a regular physical examination system should be established for regular inspection.
9, to provide employees with individual labor protection supplies, the pace of work should be reasonable. Drinks should be provided at work to replace the water, salt and vitamins lost through sweating. The workshop should have adequate occupational hazard protection facilities, and all employees should receive good production safety education and training.